|
FRS 3/10
|
- Class RK5 current Limiting
- Most popular fuse for motor circuit protection because time delay handles harmless starting and inrush currents
- Application: Motor circuits, mains, feeders, branch circuits, transformers, service entrance equipment and general purpose protection
- Provides motor overload, ground fault and short circuit protection
- helps protect motors against burnout from overloads and single phasing on three phase systems
- Dual-element fuses can be applied in circuits subject to temporary motor overloads and surge currents to provide both high performance short circuit and overload protection
- Overload element provides protection against low level overcurrent of overloads and will hold an overload which is five times greater than the ampere rating of the fuse for a minimum of ten seconds
- Voltage Rating; 600 Volts AC (or less), 300 Volts DC
- Dual-element Time-Delay 10 second (minimum) at 500% rated current
- Interrupt rating; 200,000 amp RMS sym. for AC voltages and 20,000 amp IC for DC voltages
- Ferrule/Cartridge & Knife Blade types
- Moisture resistant fiberglass bodies
- Fuse dimensions:
0-30A 5"L x 13/16" Dia.
35-60A 5 1/2"L x 1 1/16" Dia.
65-100A 7 7/8"L x 1 5/32" Dia.
110-200A 9 5/8"L x 1 21/32" Dia.
225-400A 11 5/8"L x 2 12/32" Dia.
450-600A 13 3/8"L x 2 28/32" Dia.